Filter
Top Products
13. Apply grease to an M10 x 86mm Carriage Bolt
(67) and to two Arm Bushings (44).
Attach the Left Arm (10) to the Pivot Frame (5)
with the M10 x 86mm Carriage Bolt (67), a
Carriage Bolt Bushing (20), the two Arm
Bushings (44), an M10 Washer (57), and an
M10 Locknut (56), Do not overtighten the
Locknut; the Left Arm must pivot easily.
Attach the Right Arm (9) to the Pivot Frame
(5) in the same way.
13
14. See the CABLE DIAGRAM on page 24 to
identify the cables as you assemble them.
identify the Arm Cable (54).
Apply grease to an M8 x 22mm Shoulder Bolt
(65).
Attach the Arm Cable (54) to the left Cable
Pivot (39) with the M8 x 22mm Shoulder Bolt
(65) and an M8 Locknut (58).
14
12