Vision Fitness T9600 Treadmill User Manual


 
DECK RE-WAXING PROCEDURE
Frequency: Every 1 month.
LUBE
Name:
DOW CORNING 350 SILICON
Procedure:
1. Loosen the tension bolts at both ends.
2. Pull the belt with your left hand and apply the silicon in the deck with your
right hand. (The volume of silicon applied is about 25CC.)
3. Tighten the tension bolts.
4. Start the treadmill. Step on the treadmill belt to walk the silicon in.
Adjust the belt tension if necessary.
5. With the clamp-on meter, measure the current draw of the motor. (Clamp
on either the red or the black wire.) The current should be less than
15Amps for 110V model. (less than 7.5Amps for 220V model.)
1-3