Filter
Top Products
T9200/T9250 TREADMILLS ( for Software Ver. S706)
How to enter into the engineering mode?
1. Press & Hold both “ELEVATION UP” and
“SPEED DOWN” at the same time for3-5 sec.
Then, the dot vision display first will show
VERSION ” follow show ENG 1 ”
2. Press the "ELEVATION" or "SPEED" to
select you want and press the "START" key
enter.
Display show function interpret
ENG1 set the treadmill all parameter
ENG2 console LED test mode
ENG3 treadmill running test mode
ENG4 Auto-calibration mode
KEY BEHALE FUNCTION
key name function
STOP Hold STOP key for 3 sec will Come
back to above mode
SPEED UP and ELEVATION UP Add this show parameter of speed
and elevation
SPEED DOWN and ELEVATION
DOWN
Decrease this show parameter of
speed and elevation
START To Store up the parameter
3-9