Filter
Top Products
20
GENERAL
TENSIONING THE BELT
If the running belt slips when used, use the supplied 6
MM
Allen wrench to
turn the left and right tension bolts clockwise
1
/4-turn at a time until the belt
no longer slips.
CENTERING THE BELT
If the running belt is too far to the right side, use the supplied 6
MM
Allen
wrench to turn the right tension bolt clockwise
1
/4-turn at a time until the
belt remains centered during use.
If the running belt is too far to the left side, turn the left tension bolt
clockwise
1
/4-turn at a time until the belt remains centered during use.