Filter
Top Products
30
E3600HRT R2650HRT
R2600HRT
ENGINEERING MODE
Engineering mode consists of 11 optional settings. Use the engineering
mode to enable certain features or displays on your Bike console.
ENTERING AND USING ENGINEERING MODE
• Press and hold the UP
▲
and DOWN
▼
buttons for approximately three
seconds.
• The console will beep and display engineering modes and optional
settings. Use the UP
▲
or DOWN
▼
buttons to scroll through the options.
Press the ENTER button to select the appropriate mode or setting.
OPTIONAL SETTINGS
MAX TIME
USER TIME
DF AGE
DF WEIGHT
UNIT
MACHINE
AC TIME
AC DIST
DISPLAY TEST
MACHINE TEST
VERSION
SETTING
SET A MAXIMUM WORKOUT TIME
SET A DEFAULT TIME FOR ALL PROGRAMS
SET A DEFAULT AGE FOR ALL PROGRAMS
SET A DEFAULT WEIGHT FOR ALL PROGRAMS
SET THE BIKE TO MILES OR KILOMETERS
SET UNIT TO BIKE OR ELLIPTICAL MODE
DISPLAY ACCUMULATED HOURS OF USE
DISPLAY ACCUMULATED MILES OR KM OF USE
USED BY SERVICE TECHNICIANS TO TEST LED DISPLAYS
USED BY SERVICE TECHNICIANS TO TEST MECHANICAL AND CSAFE FUNCTIONS
DISPLAY CURRENT SOFTWARE VERSION
DESCRIPTION
• Use the UP
▲
and DOWN
▼
buttons within each setting to change the setting.
• Press the START button to save settings.
• To EXIT engineering mode, press and hold the START button for three seconds.