Filter
Top Products
6
3
STEP
• Mount the upper handlebars to the
console mast using two lock washers
(M8) and two screws (M8x20L).
Tighten with the 5
MM
Allen wrench.
• Remove the four mounting screws
from the back of the console. Connect
the wire harness and heart rate wires
that come from the console mast into
the plugs located in the back of the
console. Make sure the 9 Volt
battery is plugged in and in place on
the console. Attach the console to the
mast with the four screws removed
earlier
PINK BAG
3
STEP