Filter
Top Products
R2200 Only
R2200HRT
Only
6
2
STEP
• Place the seat bracket on the seat
frame. With the 6
MM
Allen wrench
secure the seat bracket with the four
screws (M8 x 20L).
• Loosen and take out the screw on
the seat lever with the 4
MM
Allen
wrench. Turn the seat lever so the
screw holes line-up and reinstall the
screw with the 4
MM
L-shaped Allen
wrench to secure the seat lever.
• Place the seat handlebar into the
proper position on the seat frame.
With the 5
MM
Allen wrench secure the
seat handle bar with four screws
(M8 x 15L) and four lock washers
(M8).
• R2200 Only: Secure the seat cush-
ion and seat back to the seat frame by
inserting the eight screws (M6 x 55L)
and eight lock washers (M6). Tighten
with the 4
MM
L-shaped Allen wrench.
• R2200HRT Only: This product
features a lumbar control seat. To
secure this seat to the frame, remove
the plastic cover from the back of the
upright seat cushion. Use the four
screws (M6 x 55L) and four lock
washers (M6) to attach the cushions to
the frame. Tighten with the
4
MM
L-shaped Allen wrench. Snap the
plastic cover onto the back of the
upright seat cushion.
BLUE BAG
2
STEP