Filter
Top Products
22
GENERAL
TROUBLESHOOTING YOUR FITNESS BIKE
Our Bikes are designed to be reliable and easy to use. If, however, you
have a problem, these troubleshooting steps may indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: 1) Pedal bike to light up console.
SOLUTION: 2) Replace 9 Volt battery in back of console.
PROBLEM: The Bike is making a
clicking noise.
SOLUTION: Using a 15MM
wrench, remove both the right and
left pedals. Apply grease to the
threaded portion of the pedals
and reassemble the unit, making
sure the pedals are as tight as
possible.
PROBLEM: The Bike appears to work, but there is no resistance change.
SOLUTION: The magnetic brake assembly is not working properly; please
contact your retailer.
PROBLEM: The Bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all the bolts on the Bike again.
PROBLEM: The seat on your
recumbent bike rocks from side to
side.
SOLUTION: With a 13MM
wrench, loosen the Fixing Nuts on
the side of the seat frame. With an
11MM wrench, pivot the
Adjusting Post so the Fixing Nut is
at the top of the slot. Tighten the
Fixing Nut with the 13MM
wrench.
NOTE: If the above steps do not remedy the problem, discontinue use and
contact your retailer.