Filter
Top Products
15
ES700
PREVENTATIVE MAINTENANCE TIPS
Consistently following this maintenance schedule will increase the life of
your Vision Fitness
®
ES700 Indoor Cycle.
BIKE LOCATION
• Locate Bike in a cool, dry place.
BEFORE EACH CLASS
• Check that the pedals, seat levers and handlebar levers are tight.
AFTER EACH CLASS
• Release all tension from the brake.
• Check that the pedals are in good condition and properly tightened to
prevent damage.
• Simply dry the ES700 with a towel to remove sweat and dirt.
NOTE: Never use abrasive cleaning liquids or petroleum-based solvents when wiping down the cycle!
DAILY MAINTENANCE
These procedures are intended to prevent rust/corrosion and to maintain
the daily performance of your ES700 Indoor Cycle.
Wipe down the cycle at the end of each day (preferably at the end of
each class). Use an absorbent cloth, and focus on all areas where sweat
can fall or collect. Special attention should be given to the following areas:
• Flywheel
• Brake assembly
• Seat post and handlebar stem
NOTE: Be sure to wipe the entire length of the seat post and handlebar stem!
• Seat and seat adjustment levers
• Handlebar and handlebar adjustment levers
• Belt guard
• Front and back support feet