![](http://pdfasset.owneriq.net/a/c9/ac9d5c4a-61ed-46f2-8b7d-548625d5a760/ac9d5c4a-61ed-46f2-8b7d-548625d5a760-bgb.png)
7
ASSEMBLY
3
STEP
• Attach the pedals to the crank arms. Each pedal is
marked with the letter L (left) or R (right) to denote the side
of the spinning bike they are on. Be careful to align the
threads correctly to avoid damage. A little grease on the
threads should help the pedals to screw in easily and
correctly. Tighten with a 15mm wrench. The threads on
both pedals should tighten towards the front of the bike.
PEDALS