Filter
Top Products
Step 2 • Seat Support and Rear Foot
1: Attach the Seat Rail Support Post (96) to the top of the Rear Foot Frame
Extension (91) with four Bottom Support Post Bolts (186). Tighten with a
5mm Allen wrench.
2: Secure the Rear Foot Frame Extension (91) to the frame bracket using the
four Frame Extension Bolts (182).
3: Secure the Rear Foot Assembly (106) to the Rear Foot Frame Extension
(91) using the four Rear Foot Attachment Bolts (182). Tighten with a
5mm Allen wrench.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in
place and partially threaded in before completely tightening any ONE bolt.
Step 1 • Front Wheel Assembly
1: Slide the Front Foot Axle (148) through the Front Foot Nylon Sleeves (147).
2: Place the Inside Wheel Washers (150) on the Front Foot Axle (148).
3: Slip the Front Transport Wheels (149) onto the Front Foot Wheel Axle
and secure them with the outside Wheel Washers (185) and the Wheel
Attachment Bolts (182) using two 5mm Allen wrenches.
R2200 Assembly