Tunturi T30 Treadmill User Manual


 
4
O W NE R 'S MA N U AL • T 30
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the
treadmill at the left front corner. Before connecting
the device to a power source, make sure that local
voltage matches that indicated on the type plate. The
treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to reduce
the risk of electrical shock. This product is equipped
with a cord having an equipment-grounded conductor
and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed
and grounded in accordance with all local codes
and ordinances. Do not use extension cables when
connecting the equipment to the power source.
DANGER! Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or
serviceman, if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
SAFETY TETHER KEY
The treadmill cannot be used if the tether key
is not properly installed on the console; if the
key is removed from its place, the treadmill will
immediately stop. Place the safety tether key in its
place on the console. Ensure that the clip of the safety
tether key is properly attached to your clothing; as
the cord tightens, make sure the clip does not detach
itself from your clothing before the safety tether key
disconnects from the console.
CONSOLE
KEY FUNCTIONS
A. SAFETY KEY:
The monitor and the treadmill can be operated only
with the key attached on the SAFETY KEY ON
button and both of the monitor and the treadmill stop
as soon as the key is removed. Do not exercise, please
attach the Safety Key on the OFF position.
B. MAJOR FUNCTION KEYS:
1. INCLINE +: Increases the elevation level in the
range from 0% to 12% shown in the HEART
RATE / ELEVATION Display. Pressing once
increases 1 % and to speed up the decrement by
pressing and holding it for 2 seconds.
2. INCLINE –: Decreases the elevation level in the
range from 0% to 12% shown in the HEART
RATE/ ELEVATON Display. Pressing once
increases 1 % and to speed up the decrement by
pressing and holding it for 2 seconds.
3. POWER: Press this button to turn on or turn off
the power.
4. START/STOP: Starts or stops the program.
5. SCAN/SELECT: Switches from one to one
another programs in an order of the 12
programs. The order is p1, p2, p3, p4, p5,
p6, p7, p8, p9, USER SETTING 1, USER
SETTING 2, and USER SETTING 3.
6. ENTER: Press this button to confirm your
desired program or setting value. .
7. SPEED +: Increases the speed level in the range
from 0.8 to 20.0 KPH (0.5 to 12,5 MPH)
shown in the SPEED Display. Pressing once
increases 0.1KPH (0.1 MPH) and to speed up
the increment by pressing and holding it for 2
seconds.
8. SPEED –: Decreases the speed level in the
range from 0.8 to 20.0 KPH (0.5 to 12,5 MPH)
shown in the SPEED Display. Pressing once
decreases 0.1 KPH (0.1 MPH) and to speed up
the decrement by pressing and holding it for 2
seconds.
C. SPEED HOT KEYS:
6 Speed Hot Keys are set as 4, 6, 8, 10, 12, and 14
KPH or set as 2, 3,4,5,6,7 MPH. For example, the
speed changes from any speed to 8 KPH by pressing
the Speed Hot Key 8.
D. ELEVATION HOT KEYS:
6 Incline Hot Keys are set as 0,2,4,6,8 and 10% For
example, the elevation level changes from any level to
4% by pressing the Elevation Hot Key 4.
LED INDICATORS & DISPLAYS AND
OPERATING RANGES
The default values are PROGRAM = Manual (M),
TIME = 00:00 (counting up), SPEED = 0,8 KMH /
0,5 MPH, DISTANCE = 0.00 (counting up), KCAL =
0 (counting up), HEART RATE = 0, and ELEVATION
= 0.
A. 2 LED INDICATORS: The HEART RATE Indicator is
on and the HEART RATE /ELEVATION Display
shows heart rate. The ELEVATION Indicator is
on and the HEART RATE / ELEVATION Display
shows elevation level.
B. PROGRAM DISPLAY: Shows the information in
action and chosen by pressing “SCAN/SELECT”
Key. P1 to P9 and 3 user-settings modes can be
chosen from.
C. TIME DISPLAY: Shows the exercising time with
counting up or down. While the treadmill is not
running and the SAFETY KEY is on, it can be
chosen by pressing “ENTER” then adjusted by
pressing “+” or “-“. The range of counting up
is from 00:00 to 99:59 and 10:00 to 99:00 with