Filter
Top Products
4
OWNER'S MANUAL
•
C80
Fasten the front frame support to the front frame with
two allen screws (A) and base plates (B).
FRONT FRAME
1. Connect the cords from the front and rear frame tube
with each other.
2. Connect the frame tubes with each other.
PLEASE NOTE: Do not damage the console cord!
3. Tightly fasten the frame tubes with four allen screws
(C).
HANDLES
1. Remove the holder from the shaft end.
2.Set the handle at the end of the shaft and thread the
adjustment key cord from the handle over the shaft into
the front frame tube.
3. Lock the handle by fastening the base plate (D) and
the allen screw (E) at the end of the shaft.
PEDAL CRANKS
1. Push the right pedal crank forward to push the
fastening tube at the front of the pedal crank into the
handle.
2. Fasten the fastening tube to the handle with the
screw (F). Place the decorative plug over the screw (G).
3. Repeat instructions 1 and 2 for the left handle and
pedal crank.
4. Place the plastic covers onto the handle fastening sites
and fasten them with screws (H).
C80_b.indd 4C80_b.indd 4 2.2.2006 16:06:402.2.2006 16:06:40