Filter
Top Products
Removal & Replacement 600U
Remove Crank Hub Assembly
Step 1.
Use crescent wrench to remove
Large nut on crank.
Step 2.
Remove keyed washer from
under nut.
Step 3.
Use crescent wrench to remove
hex nut bearing. Use rubber mallet
to knock out the shaft pulley assembly.
Copyright 2001 True Fitness Technology, Inc.
Page 84
Step 1. Remove Crank Nut.
Step 3. Remove Hex Nut Bearing
Step 2. Remove Keyed Washer
Tools Required:
Large Crescent Wrench
Rubber Mallet
Flat Blade Screwdriver
Note:
The crank nut has left-handed
threads. Turn clockwise to loosen.
Note:
The Hex nut bearing has left-
handed threads. Turn clockwise to
loosen.