Filter
Top Products
Symptom Probable Cause Corrective Action Recommended Tools
NO BELT
MOVEMENT
(cont’d)
Motor turns but belt
does not.
Belt cannot be
moved manually-
foreign object under
belt.
• Check belt tension.
• Set belt tension to 1/8-inch deflection or
correct tension can be verified by
twisting the belt almost to a 90-degree
position.
--------
• Remove foreign object.
Perform the Amp Draw Test (page 20) to check
for excessive amp draw damage
Note:
All trouble
shooting should
be performed in
calibration
mode.
Page 16
Support Services 800-883-8783 Mon-Fri 8:30am-5:00pm Central Time Zone Fax: 636-272-7148
Page 6