Tissot 145 Watch User Manual


 
*
1
2
10/12
SEA-TOUCH
www.tissot.ch 145_EN
DIVE > AUTOMATIC START & STOP
The watch automatically starts the dive mode at the latest 5 seconds after the depth limit of 1 m 40 (4.5 feet). The dive is saved in the
logbook if the dive lasts more than 15 seconds.
Dive Suspension Dive stopped
Automatic start of dive
mode below depth
of 1.40 m / 4.5 ft
Dive mode active - elapsed
time in LCD, minutes hand
shows depth in meters or feet
on bezel, hours hand shows dive
speed in m/min or ft/min on dial
Diver comes back to surface
(above depth of
0.50 m / 1.64 feet): Time
stopped and flashing in LCD.
(see examples below)
Maximum dive time of 3 hours
Maximum dive depth is
59 m / 189 ft.
Maximum speed of ascent
and descent is
29.3 m/min or 88 ft/min
4.5 feet 1.40 m
DIVE > EXAMPLES
1. Snorkeling with manual start 2. Diving with breathing apparatus and automatic start
0 m
0.50 m
1.40 m max.
Depth [m]
Depth limit for
manual stop
< 10 sec
= 10 sec
Automatic stop
of dive
Time
Manual
dive start
Dive duration = < 3 minutes
0 m
0.50 m
1.40 m max.
Depth [m]
Depth limit for
manual stop
< 5 min
= 5 min
Automatic stop
of dive
Time
Depth for automatic
start of dive
Dive duration > 3 minutes
If the dive lasts more than 3 minutes, the dive mode stops automatically
after 5 minutes, at the surface. The dive is saved.
If the dive length doesn’t exceed 3 minutes, the dive is automatically stopped
when the diver stays more than 10 seconds at the surface.
The diver can stop the current dive manually by pressing the middle
push-button, as long as the depth is above 1.40 m.
All dives with manual start are saved in the logbook.
DIVE > AVAILABLE FUNCTIONS UNDER WATER
Under water during the dive, the tactile glass is deactivated. You can access the compass, the thermometer and the backlight by using
the push-buttons.
Compass during dive Thermo during dive Backlight during dive
Dive mode Compass Display, active
during 15 seconds
Thermo Display, °C or °F
active during 15 seconds
Backlight active
during 15 seconds
Back to Dive mode