Tissot 141_EN6/14 Watch User Manual


 
www.tissot.ch
141_EN
14/14
T-TOUCH EXPERT
*
To activate the functions on your T-TOUCH a gentle press on the push-buttons or
touch on the glass is all that is required. Excessive force may damage the watch.
The brightness of the digital display decreases when the hands are in motion.
In fast continuous setting mode, the display moves at a faster rate (e.g. for date
function: months or years instead of days) than in non-continuous or normal speed
setting mode (e.g. for date: days instead of months or years). To exit fast continu-
ous setting mode, you need to release the push-pieces for 3 seconds to continue
in normal speed setting mode.
The T-TOUCH is water-resistant to 10 bar (100 m / 330 ft) at 25°C / 77°F, but it is
not an instrument suitable for sports diving. You must not use push-buttons when
the watch is underwater. None of the functions can be activated if the glass is in
contact with a liquid.
Additional information in the "International Warranty – Service centers" booklet
SENSOR FAULT
5 sec.
When a function is selected and the display is cleared, it is probably due to a
failure of the selected function's sensor.
Battery type: button-type lithium-manganese dioxide primary battery cell.
Error: the display is cleared
Back to date display
If this happens, please contact your retailer.
WARNINGS