Filter
Top Products
www.tissot.ch
141_EN
13/14
T-TOUCH EXPERT
*
Activate glass
Thermometer display
Description of function
In thermometer mode, your T-TOUCH dis-
plays the ambient temperature.
Explanations
The temperature displayed corresponds to
that of the watch case, so this temperature
is influenced by your body temperature. That
is why the temperature displayed may differ
from the ambient temperature.
To display the actual ambient temperature,
the watch needs to be taken off for 15 to
30 minutes, in order to be free from the infl u-minutes, in order to be free from the influ-
ence of body temperature.
Characteristics of function
The temperature can be displayed in degrees Celsius [°C] or degrees Fahren-
heit [°F]. (See procedure to follow for changing units on page 5).
THERMOMETER
1 sec.
Conversion formulae: T
0
C = (T
0
F -32) x 5/9
T
0
F = T
0
C x 9/5 + 32
Measurement range: –5°C to +55°C / 23°F to 130°F
Accuracy: ± 1°C / ± 1.8°F
Resolution: 0.1°C/ 0.2°F
GLOSSARY > THERMOMETER
: time forward
: time backward
ALARM
Activate glass
Alarm 1 display Alarm 2 display
Alarm 1 or 2 display
Activate or deactivate alarm
Setting mode
Validate setting
SETTING > ALARM
The 2 alarms are associated with time T. An alarm lasts 30 seconds, without repeating. When the programmed time is reached,
you can stop the alarm by pressing one of the push-buttons.
1 sec.
or or
1 sec.
2 sec.
Alarm rings Stop alarm
Stop alarm
or
or