Filter
Top Products
15
D.Press MODE to view options for end of countdown (stop, repeat, start
Chrono). Press START to select action.
E. Press SET to save changes and exit SET mode.
F. Press SPEED/DISTANCE DISPLAY button to cycle through type of speed
and distance information to be displayed in upper row of Timer.
Timer Operation:
A.Press START to start Timer. Original time or speed and distance will be
shown in upper display, while remaining time will be shown in main
display.
B.Press STOP to stop Timer. Press START to resume or RESET to reset to
original setting.
At the conclusion of the timed period, the watch will play alert melody,
INDIGLO
®
will flash, and timer display will appear in any other watch mode
for 10 seconds. The speed or distance information is displayed if watch is
receiving data. Display will then return to original mode and Timer is reset.
Pressing any button during the 10 seconds silences the alert and resets
timer.
When the Timer is running, an hourglass icon will appear on the display in
Time of Day Mode.
Timer Mode (Countdown Timer)
The Timer will count down from a set length of time up to 100 hours.
At the end of the countdown, the Timer will optionally a) Stop at End,
b) Repeat at End or c) Stop and Start the Chronograph (Chrono must be
reset). It will also display selected speed or distance information for the
timed interval.
Setting the Timer:
A.In Timer mode, press SET button. The TENS OF HOURS value will flash.
Press START to increase setting.
B.Press MODE. HOURS display will flash. Press START to increase setting.
C.Repeat for minutes and seconds.
14
OR