Filter
Top Products
1-57
7. Replace the caseback making sure that the black gasket
material is seated in the groove in the case.Also be sure that it
is aligned properly (as you noted in step #2) so that the buzzer
will line up with the internal connections.
8. Carefully reattach the straps.The shorter piece with the buckle
is attached to the upper set of lugs.
INDIGLO® night-light
electroluminescent
technology used in the INDIGLO® night-light illuminates
entire watch face at night and in low light conditions.
Water-Resistance
Your 50 Meter Water-Resistant watch withstands water pressure
up to 86 p.s.i. (equals immersion to 164 feet or 50 meters below
sea level).
WARNING:THIS UNIT WILL NOT DISPLAY SPEED AND DISTANCE OR
HEART RATE DATA WHEN OPERATED UNDER WATER.
WARNING:TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
1.Watch is water-resistant only as long as lens,pushbuttons and
case remain intact.
2. Even though the watch may be water-resistant to a significant
depth (100 or 200 meters), it is not a diver watch and should
not be used for diving.
1-56
3.Timex recommends rinsing your watch with fresh water after
exposure to salt water.
Common Questions
Q: When using the Auto-Split “by distance”feature,sometimes the
distances for the splits are a little less than my setting (e.g.
“0.244 km”when the setting is “0.25 km”); how can this happen?
A: This is due to the way the watch uses current speed and dis-
tance to predict the actual split point in your run. Occasionally,
the watch will over-estimate, creating a slightly “longer” split
distance first, followed by a “short” split.This shorter split dis-
tance is required so that the watch can compensate for these
slight over-estimations and to prevent them from accumulat-
ing over the course of your workout.
So,for the example given here,the previous split should have
displayed a distance value slightly longer than the Auto-Split
setting of 0.25 km.
Q: Why won’t my Hands-Free or Distance Alert features work
when using just a Heart Rate Sensor?
A: These features rely on information provide by the Timex®
Speed + Distance Sensor.
Q: Why don’t I see any information for Overall Time or Distance
when using just a Heart Rate Sensor?