Filter
Top Products
NOTE
If no button is pressed in 15 seconds, the dive computer will go
back to the dive display without changing the gas mix. Upon
ascent, the computer prompts you to change gas when the PO
2
level you have set for the next mix allows a gas change.The
prompt is an audible 3 beeps and the current O
2
mix starts to
blink.
6.3. Diving in GAUGE mode (DIVEgauge)
If set to GAUGE mode, the dive computer can be used as a bottom timer or as a
freediving instrument.
In the GAUGE mode, the total dive time is always displayed in minutes in the lower
right corner. In addition, a Dive Timer in the center window displays time in minutes
and seconds. The center window Dive Timer is activated at the start of the dive and
it can be reset during the dive and used as a stopwatch by pressing the SELECT
button.
BY PRESSING THE SELECT
BUTTON DURING A DIVE, A BOOK-
MARK IS WRI
TTEN IN THE PROFILE
MEMORY, THE DIVE TIMER IS RESET,
AND THE PR
EVIOUSLY-TIMED
INTE
RVAL IS DISPLAYED BELOW.
NOTE
The GAUGE mode does not provide decompression information.
71