Filter
Top Products
5.8.6. Setting the Safety Stops/Deep Stops
The Deep Stop setting allows you to choose between traditional Safety Stops or Deep
Stops. If Deep Stops are set to OFF, the traditional Safety Stop calculation is used. If
set to ON, iterative Deep Stops will be prompted instead. The length of the individual
Deep Stops can be set to 1 or 2 minutes.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT
BUTTON.
5.8.7. Setting the RGBM values
For certain divers and diving conditions, it may be desirable to set the attenuated
RGBM mode. The selection is displayed during the DIVE mode startup. The options
are full RGBM effects (100%), and attenuated RGBM (50%).
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT
BUTTON.
45