Filter
Top Products
13
APPENDIX
B
Diagnostic Software
This appendix provides an overview of the SunVTS diagnostic application and
instructions for updating the SunVTS software to recognize the Sun Blade T6320
XAUI Pass-Through Fabric Expansion Module. This appendix contains the following
sections:
■ “SunVTS Diagnostic Software” on page 13
■ “Find the SunVTS documentation at:” on page 14
SunVTS Diagnostic Software
The SunVTS software executes multiple diagnostic hardware tests from a single user
interface. SunVTS is used to verify the configuration and functionality of most
hardware controllers and devices. The SunVTS software operates primarily from a
graphical user interface, enabling test parameters to be set quickly and easily while
a diagnostic test operation is being performed.
The SunVTS nettest diagnostic can be used to test all of the networking interfaces
on the system, including the interfaces on the FEM.
To use the nettest diagnostic, you must have the SunVTS software installed on
your system. Use SunVTS 6.4 Patch Set 3 or later. You will need to update the
SunVTS configuration to recognize the FEM. Refer to the SunVTS documentation in
TABLE B-1.