Star Trac P-TBTX Exercise Bike User Manual


 
12 STAR TRAC TOTAL BODY TRAINER OWNERS MANUAL
Using a 5 mm hex key, secure the display mounting bracket to the TOTAL BODY
TRAINER neck using four M6 X 70 socket head cap screws with lockwashers. TIGHT-
EN THE SCREWS SECURELY.
Plug the display cable connector into the socket on the display electronics board. Be
sure the connector is oriented properly, and is fully seated in the
socket.
Position the back cover on the display and secure with six #8 X 1/2” self-threading
screws, using a #2 Phillips screwdriver. DO NOT OVERTIGHTEN THE COVER
MOUNTING SCREWS.
Using a #2 Phillips screwdriver and one #10 X 1” screw, secure the bottom of the dis-
play cover to the display mounting bracket.
3. Install the Upper Body Arms
Position the right-side upper body arm on the right-side hub, engaging the locating
pin on the upper body arm with the un-threaded hole in the hub.
Step 2C
Step 2D
Step 3B
Step 2E
Step 4A