Star Trac E-ST 5090 Stepper Machine User Manual


 
26 STAR TRAC E-ST STEPPER OWNER
S MANUAL
PREVENTIVE MAINTENANCE
With durable, high performance components, the STAR TRAC E-ST STEPPER is designed for
heavy usage with minimal maintenance
required. To keep your Stepper in top condition, Star Trac strongly recommends performing the regular daily, weekly and monthly pre-
ventive maintenance routines outlined below. Any unusual symptoms, such as a loud continuous noise during operation, should be
reported to STAR TRAC PRODUCT SUPPORT DEPARTMENT at (800) 503-1221, or USA 1-714-669-1660.
DAILY MAINTENANCE
l
Remove excessive accumulations of dust, dirt, and other substances by using a clean, soft cloth and a non-abrasive liquid cleaner,
such as Formula 409
TM
or FANTASTIK
TM
. Wipe down the exterior of the display panel, hand rails, pedals, shrouds and heart rate
grips.
NOTE: DO NOT spray the cleaner directly onto the Display Panel or heart rate grips.
WEEKLY MAINTENANCE
Perform the following services each week:
l
Vacuum the floor under and around the STAR TRAC E-ST STEPPER. Move the STAR TRAC E-ST STEPPER to another spot, if
necessary, to vacuum thoroughly.
l
Inspect the Display Panel mounting screws for security, and retighten if necessary.
l
Inspect the Display Panel keypads for wear.
MONTHLY MAINTENANCE
Perform the following services each month, or as needed:
l
Check that the pedals and shrouds are secure.
l
Check the hand rails for looseness. Tighten screws as necessary.
l
Check for smooth and quiet operation of all moving parts.