Filter
Top Products
October, 2012 (Version 7) STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE
8
INPUT SIGNAL LEVEL REQUIREMENTS
Common sources of television signal are cable, satellite or over-the-air antenna systems. Many of these choices
will provide signal in analog, digital or both even both formats. In order to provide high-quality images, the signal
level supplied to each screen should be in the range of +5dBmV to +15 dBmV when read on analog channels. A
signal level outside of this range will provide less than optimum results. In order to ensure the highest degree of
satisfaction, StarTrac recommends using a StarTrac Certified Installer for installation & ongoing maintenance.
Enter MENU and SUB-MENU page
1. Use CHANNEL STkeys to select MANUAL PROGRAM
2. Push VOLUME S key to move to channel list
3. Use VOLUME ST keys to select
TV-CADTV-CATV-DTV
4. Use CHANNEL ST keys to select channel
5. Push CC key to Delete or Add
Enter MENU and SUB-MENU page
1. Use CHANNEL ST keys to select PROGRAM LIST
2. Push VOLUME S key to move to channel list
3. Use VOLUME ST, CHANNEL ST keys to select
channel
Broadcasting frequency is automatically searched and saved. The search stats from analog TV (NTSC) to digital
TV(VSB/QAM) and takes from 2 to 4 minutes. Channel numbers are allocated for weak signals from analog
broadcasting. In DTV, weak signals or signals without broadcasting are ignored.
Depending on the content provided by the cable or satellite company, there may be some content received that is
inappropriate for your intended viewing audience. Once channel scanning is complete, these channels can be
deleted as necessar
y
b
y
usin
g
the IR remote control.