Filter
Top Products
OPERATIONAL INSTRUCTIONS
SEAT HEIGHT ADJUSTMENT
Proper seat height is important for efficient exercise. To determine proper seat height, sit on the bike and
center the ball of your foot on the pedal in the down position. Your leg should be slightly bent and relaxed as
shown.
If your leg is too straight or your foot cannot touch the pedal, you will need to lower the seat. If your leg is
bent too much you will need to raise the seat. Remove the LOCKING KNOB(46). Lower or raise the SEAT(43)
to the desired height and secure with the LOCKING KNOB(46).
The LOCKING KNOB(46) must be inserted into one of the holes in the SEAT POST(4).
The LOCKING KNOB(46) should be screwed in tight to make the SEAT POST(4) fit securely in
the MAIN FRAME(1).
CAUTION:
NOTE:
LOAD ADJUSTMENT
12
NOTE: The load will increase as you pedal faster.
To increase the load, turn the TENSION KNOB(27) clockwise.
To decrease the load, turn the TENSION KNOB(27)
counterclockwise.