Filter
Top Products
ASSEMBLY INSTRUCTIONS
8
STEP 3
Position the LEG EXTENSION(9) in front of the BUMPER(16). Attach the FRONT PIVOT ARMS(4) to
the FRONT FRAME(2) with BUTTON HEAD BOLTS(M12x1.75x85mm)(35) on both sides. Attach the
REAR PIVOT ARMS(5) to the REAR FRAME(1) with BUTTON HEAD BOLTS(M12x1.75x95mm)(34) on
both sides.
NOTE: Do not over tighten BUTTON HEAD BOLTS(34, 35) as the FRONT and REAR PIVOT ARMS(4, 5)
must be able to pivot freely after BUTTON HEAD BOLTS(34, 35) are tightened.