Filter
Top Products
USING THE FITNESS METER
OPERATIONAL INSTRUCTIONS
12
Function Button:
Power off :
Power on :
Functions:
Seat movement or push the button.
Automatic shut off after 4 minutes of inactivity.
Press and release to select functions.
Press and hold for two seconds to reset all
functions to zero, except TOTAL COUNT.
MODE/RESET
:
SCAN:
COUNT:
TIME:
CALORIES:
Automatically scans each function of TIME, TOTAL COUNT, COUNT, and CALORIES in
sequence with a change every six seconds.
Displays the elapsed time, from 1 sec up to 99:59 minutes.
Displays the total number of rows you have taken, from zero to 9999 rows.
Displays the calorie consumption, from zero to 9999 cal.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
HOW TO INSTALL AND REPLACE BATTERIES:
1.
2.
Do not mix a new battery with an old battery.
Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
Rechargeable batteries are not recommended.
1.
2.
3.
NOTE:
Open the Battery Door on the back of the meter.
The meter operates with two AA batteries, two batteries included.
Refer to the illustration to install or replace the batteries.
AA Batteries
TOTAL COUNT:
Displays the total accumulated number of rows you have taken, from zero to 9999 rows.
The total accumulated rows is retained when the meter is turned off.
The meter will shut off automatically after 4 minutes of inactivity. All function values will be
kept. Push the button and hold it down for two seconds to reset all functions to zero,
except TOTAL COUNT.
The TOTAL COUNT will be reset to zero after batteries are removed for battery replacement
or storage of the unit.
1.
2.
NOTE: