Filter
Top Products
ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the CUSHION SUPPORT FRAME(4) to the SUPPORT POST(5) with HEX BOLT(M10x1.5x75mm)
(19), WASHERS(M10)(24), and NYLOCK NUT(M10x1.5)(23). Lock the CUSHION SUPPORT FRAME(4)
in position with the LOCKING PIN(14).
STEP 2
Make sure the long ends of the Foot Plates on the FOOT SUPPORT(7) point to front. Insert the FOOT
SUPPORT(7) into the SUPPORT POST(5) and secure with HEX BOLTS(M10x1.5x65mm)(17),
WASHERS(M10)(24), and NYLOCK NUTS(M10x1.5)(23).
FRONT
BACK
The long ends of the Foot Plates
on the FOOT SUPPORT(7) must
point to front.