Filter
Top Products
9
ASSEMBLY INSTRUCTIONS
To attach the HANDRAIL(9), position the HANDRAIL(9) under the SEAT CARRIAGE(7) as shown in the
above illustration and secure with BUTTON HEAD BOLTS(M8x1.25x45mm)(71), ARC WASHERS(M8)
(98), and LOCK WASHERS(M8)(100).
STEP 8
Refer to the inset drawing. Plug the PULSE SENSOR WIRE(55) into the SOCKET of the PULSE EXTENSION
WIRE(43) located on the SEAT RAIL(45).
STEP 7
NOTE:
The PULSE SENSOR WIRES(55) go through the tube of the HANDRAIL(9). Be careful not to
damage the wires when inserting the BUTTON HEAD BOLTS(M8x1.25x45mm)(71) through the
holes in the HANDRAIL(9) when attaching it to the SEAT CARRIAGE(7).
Socket of Pulse
Extension Wire(43)
STEP 6
Attach the SEAT FRAME(8) to the SEAT CARRIAGE(7) with BUTTON HEAD BOLTS(M10x1.5x200mm)(76),
WASHERS(M10)(99), LOCK WASHERS(M10)(101), and ACORN NUTS(M10x1.5)(97).