Filter
Top Products
ASSEMBLY INSTRUCTIONS
STEP 1
Attach the FRONT STABILIZER(2), the longer of the two stabilizers, to the front of the MAIN FRAME(4)
with ROUND HEAD BOLTS(M6x1x16mm)(18) and WASHERS(M6)(15).
STEP 2
Attach the REAR STABILIZER(1) to the back end of the MAIN FRAME(4) with ROUND HEAD
BOLTS(M6x1x16mm)(18) and WASHERS(M6)(15).
STEP 3
Slide the TENSION KNOB(10) onto the SHAFT(11) and secure with ROUND HEAD BOLT(M6x1x12mm)
(25).
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.