Filter
Top Products
10 11
965 HEART RATE MONITOR + PEDOMETER
HEART RATE LOCK
To deactivate fi nger Touch Heart Rate (when you don’t want to
accidentally acquire heart rate):
1. In Time mode, PRESS & HOLD the START/STOP key. The lock
icon (
) will appear in the upper left of the display.
2. To unlock, PRESS & HOLD the START/STOP key for 2 seconds
in Time mode. The lock icon will disappear.
RESETTING THE WATCH
In rare circumstances, you may wish to completely reset the
watch to factory defaults.
1. In Time mode, PRESS & HOLD the MODE, START/STOP, and
RESET buttons at the same time for 5 seconds. The watch
will power down.
2. PRESS & HOLD ANY BUTTON for 3 seconds to turn the watch
back on.
VIEWING THE BACKLIGHT SYSTEM
To operate the Backlight:
1. PRESS the LIGHT key. Backlight will illuminate for
approximately 5 seconds.
NOTE: Excessive use of Backlight System may signifi cantly reduce battery
life.
ACQUIRING HEART RATE: FINGER TOUCH
Heart rate may be acquired from any operating mode (not in any
Setting Sequence).
1. With the watch on your wrist, TOUCH &
HOLD
THE HEART RATE SENSOR with your
index fi nger.
NOTE: You may exit Heart Rate mode at any time by
Pressing the Mode, Start/Stop or Reset key.
2. Continue TOUCHING & HOLDING until
heart rate displays.
3. Once Heart Rate is acquired, RELEASE THE SENSOR. Heart
Rate will continue to display for a period of approximately
10 seconds.
4. If trouble acquiring heart rate, moisten the underside of
the watch case (so contact between the wrist and watch
is ensured). To activate heart rate, the watch’s back plate
must come into direct contact with your skin, while your
fi ngertip is touching the top case.
HEART RATE LOCK, RESET & BACKLIGHTACQUIRING HEART RATE
Heart Rate is Displayed in both
Beats per Minute and Percent
of Maximum Heart Rate.
SP1036IS01SPO.indd 10-11SP1036IS01SPO.indd 10-11 7/10/12 6:19 PM7/10/12 6:19 PM