Filter
Top Products
XU875 & XR895
15
STEP 2: FRONT CONSOLE MAST ASSEMBLY
1. Unravel the Computer Cable (29) and snake it through the Console Mast Cover (38) and the
Console Mast (2) until the cable connector comes out the top opening of the console mast.
Slide the plastic cover (38) onto the console mast, ensuring the correct orientation of the cover.
2. Install the Console Mast (2) onto the Main Frame (1) with the 7pcs of 5/16 x 5/8 Hex Head
Screws (51), 6pcs of 5/16x19x1.5T Flat Washers (72) on the side screws and 1pc of 5/16 x
20x 1.5T Curved Washer (99) on the front screw by using the 12/14mm Wrench (100).