Filter
Top Products
4
Elliptical T
rainer
XE295
#108. Phillips Head
Screwdriver
#107. Short Phillips
Head Screw Driver
#106.13/14mm
Wrench
#109.12/14mm
Wrench
Assembly Tools
1. Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under the bottom
edge of the carton and pull it away from the cardboard underneath, separating the staples that join the two
together. Lift the box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are
found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. The hardware is separated into four steps. Remove the tools rst. Remove the
hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis
(#) are the item number from the assembly drawing for reference.
Pre-Assembly
XE295
Assembly Instructions
To assist you in assembling your new Spirit Fitness elliptical, we have posted an assembly video at the
following link: http://www.spirittness.com/customerservice/video/ellipticalvideos.html
Assembly Video