Spirit XE150 Home Gym User Manual


 
XE Series Elliptical
16
Getting familiar with the control panel
XE150
Console
Starting a program
Quick Start
After the console powers up you may press the Start key to begin, this will initiate the Quick
Start mode. In Quick Start the Time will count up from zero and the workload may be
adjusted manually by pressing the Up/Down buttons. Distance and Calories will accrue,
starting from zero.
The Calorie window will switch between Calories and Watts every 5 seconds. The Calorie
reading shows total Calories burned and is an approximate number. The Watt reading
indicates how much work you are doing. If the Watt reading is 100, this means you are
doing enough work to light a 100 watt light bulb.
The bottom left data window will switch between RPM and Speed every 5 seconds. RPM is
your actual pedal rotation speed, and the Speed readout is in MPH, indicating approximate
road speed as if pedaling a bicycle in 7
th
gear.
The Distance window shows distance traveled, based on pedal speed, in miles. The Pulse
window will display your heart rate in beats per minute if you are holding the heart rate
hand sensors, or wearing a chest strap transmitter.
Manual