Spirit ET8 Treadmill User Manual


 
ET6 / ET8 / ET10
20
How the Heart Rate Control Program Works:
Heart Rate Control (HRC) uses your treadmill's speed and incline systems to adjust your heart rate.
Increases and decreases in elevation affect heart rate much more efficiently than changes in speed
alone. The HRC program automatically changes the speed and elevation gradually to achieve the
programmed target heart rate.
Heart rate Auto-Pilot feature (ET8 / ET10 only)
This unique feature allows the user to instantly enter the Heart Rate Control mode at any time with the
press of a button. The HR2 program button also doubles as the Auto-Pilot button. During any program
the user may press the Auto-Pilot button to enter the HRC program. Your current heart rate (the heart
rate you are at when you press Auto-Pilot) will be maintained automatically by the Auto-Pilot program.
You may press the elevation/incline up or down buttons to change your target heart rate while in the
Auto-Pilot mode.
Selecting a Heart Rate Control Program:
You have the option, during the setup mode, to choose either the Weight Control (H-1) program or
the Cardiovascular (H-2) program. Weight Control attempts to maintain your heart rate at
70% of your Maximum Heart Rate. Cardiovascular attempts to maintain your heart rate at
90% of your Maximum Heart Rate. Your Maximum Heart Rate is based upon a formula that
subtracts your age from 220. Your age input is performed during the setup mode.
CAUTION!
The target value used in H-1 and H-2 programs is a suggestion only for normal, healthy individuals.
Do not exceed your limits! You may not be able to obtain your chosen target. If in question, enter a
higher age value that will set a lower target goal.
CAUTION!
Intended for wireless transmitter chest strap only. Do not use Pulse Grip bar for Heart Rate Control.
You must receive a strong / steady value in heart rate window.
STEP 1: Press HR1 or HR2 button.
STEP 2: The Pulse window will be blinking, showing the default HR for this program. You may
adjust it and press enter if you want or just press enter to accept the default value.
STEP 3: The Calorie will now be blinking showing bodyweight. Adjust and press enter or press
enter to accept default.
STEP 4: The Pulse window will now be blinking showing age. Adjust and press enter or press
enter to accept default. Adjusting Age will change the Target HR value.
STEP 5: The Time window will now be blinking. Adjust the time and press enter.
STEP 6: Press Start to begin program.
During the program you may increase or decrease the target heart rate by pressing the
elevation/incline up or down buttons.
Heart Rate Control programming
Heart Rate Control