Spirit EL 5 Elliptical Home Gym User Manual


 
EL3 /EL5 Elliptical
27
program will Pause the program for 5 minutes. If you need to get a drink, answer the phone or
any of the many things that could interrupt your workout, this is a great feature. To resume your
workout during Pause just press the Start key. If the Stop/Reset button is pressed twice during a
workout the program will end and the console will return to the start up screen. If the Stop/Reset
key is held down for 3 seconds the console will perform a complete Reset. During data entry for a
program the Stop/Reset key performs a Previous Screen function. This allows you to go back
one step in the programming each time you press the Stop/Reset key.
The Program Keys are used to preview each program. When you first turn the console on you
may press each program key to preview what the program profile looks like. If you decide that you
want to try a program, press the corresponding program key and then press the Enter key to
select the program and enter into the data setting mode.
The program keys also act as a Number Key Pad when you are in the data setting mode. Under
each program key is a number. If you are setting new data, such as Age, weight etc., you can use
these keys to enter the numbers quickly.
Programming the console
Each of the programs can be customized with your personal information and changed to suit your
needs. Some of the information asked for is necessary to ensure the readouts are correct. You will
be asked for your Age and Weight. Entering your Age is necessary during the Heart Rate control
programs to ensure the correct settings are in the program for your Age. Otherwise the work
settings could be too high or low for you. Entering your Weight aides in calculating a more correct
Calorie reading. Although we cannot provide an exact calorie count we do want to be as close as
possible.
A message about Calories: Calorie readings on every piece of exercise equipment, whether it is
in a gym or at home, are not accurate and tend to vary widely. They are meant only as a guide to
monitor your progress from workout to workout. The only way to measure your calorie burn
accurately is in a clinical setting connected to a host of machines. This is because every person is
different and burns calories at a different rate. Some good news is that you will continue to burn
calories at about the same rate as during exercise for 20-30 minutes after you have finished
exercising!
Entering/Changing Settings
When you enter a program, by pressing a program key, then enter key, you have the option of
entering your own personal settings. If you want to workout without entering new settings then just
press the Start key. This will bypass the programming of data and take you directly to the start of
your workout. If you want to change the personal settings then just follow the instructions in the
message window. If you start a program without changing the settings the default, or saved,
settings will be used.
The default computer settings are: Age = 35, Weight = 155 Lbs., Time = 30:00, Max Level, each
program has a different maximum work level: Hill = 7, Fatburn = 5, Cardio = 7, Strength = 8,
Interval = 7.
NOTE: Age and Weight default settings will change when you enter a new number. So the last
Age and Weight entered will be saved as the new default settings. If you enter your Age and