Filter
Top Products
22
P/N 211948C 01/04
25.
1
38
36
40
41
40
35
35
38
36
35
35
37
26.
42
38
36
40
40
27.
Support pole on sawhorse. Attach backboard assembly to top pole section (1). Then install pole cap (41).
NOTE: Two people are recommended for this step. Use caution; elevator assembly is heavy.
Install handle assembly to lower elevator
tubes (35) using bolt (36), spacers (37),
and nut (38). NOTE: Before going onto
the next step, set adjustment system to
the 10’ (3.05m) setting.
Insert bolt (36) through the left side of the upper
elevator tube (40), then stretch spring (42) onto bolt
(36). Insert bolt (36) through the right side of the upper
elevator tube (40) and secure with nut (38).
USE EYE PROTECTION
WHEN INSTALLING
SPRINGS.
WARNING!