18
P/N 211948C 01/04
19.
52
14
49
48
50
51
60
20.
22
Apply logo and height indicator labels (52) to
adjustment rod (51) as shown. Attach handle parts
(48, 49) to adjustment rod (51) with screw (50),
carriage bolts (22), and flange nuts (14) as shown.
IMPORTANT! Indicator labels should be applied
as close to holes as possible to prevent labels
from being damaged during height adjustment.
NOTE: Holes in adjustment rod allow for either rear
access or side access.
Insert handle assembly through pole mount assembly as
shown. Lock pole assembly in place at the 10’ (3.05m) mark
with pin (60).