11/05 ID# 21112201
9
C
O
N
C
R
E
T
E
Bounce pole sections together until they no longer move
toward taped reference mark.
Insert pole cap onto bottom pole end. Mix concrete
and fill pole.
NOTE: Concrete must cure before going on to the
next step.
POLE(S) NOT INCLUDED.
FOLLOW MANUFACTURERS
INSTRUCTIONS
ACCORDINGLY.
NOTE:
IMPORTANT!
POLES SHOULD
HAVE A
4-1/2” (11.4 CM)
MINIMUM OVERLAP.
IMPORTANT!
FAILURE TO FILL YOUR POLE
COMPLETELY WITH CONCRETE
AS DESCRIBED IN THESE
INSTRUCTIONS WILL VOID
ALL WARRANTIES
WRITTEN OR IMPLIED.
10.
11.
FOLLOW MANUFACTURERS
INSTRUCTIONS ON FILLING
POLE ACCORDINGLY.
NOTE: