Filter
Top Products
www.evofitness.com 23
ASSEMBLY
STEP 4:
Rotate the console up till it stop as drawing shown. Tighten the screw (807) of the
console connect tube (213) for both side to keep the console from moving during
the assembly
Mount the Handle Bar Cover - LR (208) underneath the console and attach it with
Upright - Left (301) , secure by two M4×15mm screw (802), one 3x 10 mm (803)
screw. Fit the top of Handle Bar Cover-LR(208) with the console and secure with
two M4x15mm screw (802) underneath the console and two same screw (802)
from the outside as drawing shown . Then mount the Handle Bar Cover - LL (207)
to Upright - Left (301) and secure with four M4×15mm screw (802). Repeat the
same procedure for the right hand side as the drawing shown.
802
X20
803
X2