Filter
Top Products
www.evofitness.com 19
ASSEMBLY
STEP 2: Assemble Upright Frame
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or
pinch (Hand tighten bolts until last step)
A) Raise the Left and right uprights (301 x 2)
B) Secure the left upright (301) with two 8x18mm Allen bolts (810) and
two # 8 washers through the front side of the base frame. Hand tighten.
C) Secure the right upright (301) with two 8x18mm Allen bolts (810) and
two # 8 washers through the front side of the base frame. Hand tighten.
D) Insert one M8x52mm Allen bolt (811) and one #8 washer through the
side of the base frame and the left upright. Hand tighten.
E) Insert one M8x52mm Allen bolt (811) and one #8 washer through the
side of the base frame and the right upright. Hand tighten.
Tighten all Allen bolts with Allen wrench C (provided with hardware)
811
X2
810
X4
812
X6