Filter
Top Products
22 9.35HR TREADMILL
A
SSEMBLY
STEP 5: ATTACHING THE UPRIGHT COVER AND CONNECT COMPUTER CABLE
NOTE: BE CAREFUL NOT TO DAMAGE THE WIRES WHEN SECURING THE
UPRIGHT COVERS.
(A) Attach the Upright Cover – LR (304) to the Left upright (301), and secure using the
two
4x15mm Screws (807).
(B) Repeat the above process for the left side.
(C) Lower the console (100) onto Left and Right Upright Covers, and secure with four
#8x20mm Screws (806).
(D) Make all the necessary computer connections as pictured below. The connectors are
specially designed to only connect with the matching connectors.
(E) Before proceeding to the next steps recheck that all the cables are firmly connected.
806
X4
807
X4