Filter
Top Products
44 835i TREADMILL
TROUBLESHOOTING
SYMPTOM
CAUSE
SOLUTION
No power to display
A). Not plugged in.
B). Power switch not activated
C). Power input circuit breaker blown.
Please check power input and fuse.
Contact your dealer if unit is plugged in,
powered on and circuit breaker is
depressed.
LCD display abnormal LCD damaged Contact your dealer for troubleshooting
SPEED ERROR
A).speed feed back problem.
B).Motor console damaged.
Switch off the power and switch on after 10
seconds then press START. Check:
1. Does the running belt move?
2. If the running belt moves, does error
message appear after 10 seconds?
If the belt moves and message does not
appear after powering off, lubricate the
running belt and deck. If the melt moved
and message appears, please contact your
dealer.
Show E7 Incline motor malfunction.
You can keep going to use except adjust
the grade.
Contact your agent to determine and get
solutions.