Filter
Top Products
16 7.35 R TREADMILL
ASSEMBLY
STEP 3: Attach Handle Bars
Note: Left Handle Bar has 2 connector wires
1. Before attaching right handle bar; connect OTC wire (220) (black
connector), then fasten handle bar on the console with 2x M8 x 15mm
Allen Head Bolts (306) and 2 M8 flat washers (313).
2. Before attaching left handle bar; connect OTC (220) wire (black
connector), then fasten handle bar on the console with 2 x M8 x 15mm
Allen Head Bolts (306) and 2 M8 flat washers (313)..
3. Note: Secure Allen Head Bolts closest to rear of treadmill first ensuring
a snug fit between handle bar and console prior to tightening.
4. FOLD TREADMILL AND TIGHTEN ALL ALLEN HEAD BOLTS (306)
FROM PREVIOUS STEPS
306 X4
313 X4
Green plastic wrap
Clear plastic wrap
!!!Caution Pinch
point! Do not pinch
wires between
frame!!!
Tighten all bolts and fasteners now