Filter
Top Products
3
● Before using the stopwatch, be sure to reset the digits to “00.”
When the stopwatch is stopped, press Button A.
When it is counting, press Button C to stop the measurement and then press Button A.
1 Standard measurement
Press to show the LAP TIME, LAP TIME IN PROGRESS or SPLIT TIME display.
D
C AC
START
STOP RESET
▼
▼
STOPWATCH OPERATION
A
B
C
D
2 Accumulated elapsed time measurement
Press to show the LAP TIME, LAP TIME IN PROGRESS or SPLIT TIME display.
D
C CC
START
STOP RESTART
C
STOP
A
RESET
▼
▼
▼
▼
3 Lap time measurement
Press to show the LAP TIME or LAP TIME IN PROGRESS display.
D
* Restarting and stopping the stopwatch can be repeated by pressing Button C.
A AC
START
LAP 1 LAP 2
C
FINISH
A
RESET
▼
▼
▼
▼
* Lap time measurement can be repeated by pressing Button A.
Split time
Lap time
Start
* “Lap time” is the time that has elapsed from the start of
one stage of an activity to that of the next stage.
“Split time” is the time that has elapsed from the start of
an activity to any given stage.
●
In the LAP TIME display, the previous lap time is displayed in the upper row while the
accumulated elapsed time is displayed in the lower row during measurement.
●
In the LAP TIME IN PROGRESS display, the previous lap time is displayed in the upper
row while the current lap time measurement is displayed in the lower row during
measurement.
Lap No. for the previous lap
Lap time for the previous lap
Accumulated elapsed time
Lap time in progress
Lap No. for the previous lap
Lap time for the previous lap
4 Split time measurement
A AC
START
SPLIT 1 SPLIT 2
C
FINISH
A
RESET
▼
▼
▼
▼
* Split time measurement can be repeated by pressing Button A.
D
A
C
Lap time
Split time
Lap/split No.
Flashing mark appears
while the measurement is in progress.
●
If no lap time/split time measurement is made in the STOPWATCH display and no data is stored in memory, the display
shown at right will appear when the display is changed over to the MEMORY RECALL.
●
Even if the stopwatch is reset to “00,” stored data is not erased and can be recalled unless a new measurement is started.
●
The stopwatch can measure the lap time/split times as many times as necessary, but only the first 100 data will be stored
in memory.
5 How to use the memory function
● Up to 100 lap/split time data can be stored and recalled either during or after
measurement.
Press to show the MEMORY RECALL display.
* In memory recall after measurement, the oldest measurement stored in memory is
displayed first. In memory recall during measurement, the newest one is displayed first.
With each press, the stored data is recalled successively from the oldest to the
newest.
With each press, the stored data is recalled successively from the newest to the
oldest.
or
Press to return to the STOPWATCH display.
Press to show the SPLIT TIME display.
D
B
C
A
B
▼
▼