Filter
Top Products
English
10
English
11
TIME MODE
l
Time setting procedures include hand settings of the main watch and small
watch to the current time.
l
The hands should be correctly aligned to the 0 position (initial position)
before starting to set the time. If they are not correctly aligned to the 0
position, it is necessary to correct their alignment before setting the time.
To correct the hand alignment, refer to HAND POSITION ADJUSTMENT.
l
How to set the time (main watch and small watch)
Pull out to second click when the
small second hand is at the 12 o’clock
position.
The small second hand will stop on
the spot.
Small second hand
Turn to set the time of the main
watch.
* The moment the date changes is
midnight. When setting the hour hand,
be sure that AM/PM is set correctly.
* While doing so, set the minute hand 4 to
5 minutes ahead of the correct time, and
then slowly move it back to the exact
minute(s).
Press to set the time for the small
watch.
With each press of button B the
small watch hands will advance 1
minute. Pressing and holding button
B will advance the small watch hands
rapidly.
MODE SELECT
T
I
M
E
5
6
1
0
T
M
R
C
H
R
A
L
M
L
O
C
Upon completion of all settings,
push back in to normal position
simultaneously with a time signal.
Small watch
Hour hand
Minute hand
MODE SELECT
T
I
M
E
5
6
1
0
T
M
R
C
H
R
A
L
M
L
O
C
B
CROWN
CROWN
CROWN
B
* If the crown is pulled out while the timer
or stopwatch is measuring time, the
measurement will be forcibly terminated
and the timer or the stopwatch will be
reset.
7T84_E.indd 10-11 07.5.25 11:42:28 AM