Seiko 5M42 Watch User Manual


 
26
English
* Before using the water resistance 5, 10, 15 or
20 bar watch in water, be sure the crown is
pushed in completely.
Do not operate the crown and button when the
watch is wet or in water. If used in sea water,
rinse the watch in fresh water and dry it
completely.
* When taking a shower with a water resistance
5 bar watch, or taking a bath with a water
resistance 10, 15 or 20 bar watch, be sure to
observe the following:
Do not operate the crown and button when
the watch is wet with soapy water or
shampoo.
If the watch is left in warm water, a slight
time loss or gain may be caused. This
condition, however, will be corrected when
the watch returns to normal temperature.
TEMPERATURES
Your watch works with
stable accuracy between
a temperature range of
5°C and 35°C (41°F and
95°F).
Do not leave your watch in very
low temperatures below –
10°C (+14°F) for a long time since
the cold may cause a slight time
loss or gain. However, the above
conditions will be corrected when
the watch returns to normal
temperature.
+60°C
-10°C
SHOCKS & VIBRATION
NOTE:
Pressure in bar is a test pressure and should not
be considered as corresponding to actual diving
depth since swimming movement tends to
increase the pressure at a given depth. Care
should also be taken on diving into water.
hard surfaces, as this may cause
damage.
Light activities will not
affect your watch, but be
careful not to drop your
watch or hit it against