Filter
Top Products
22
English
DATE AND DAY SETTING – Cal. 5M43
Date
Crown
1. Pull out the crown to the first click.
If the crown is of the screw lock type, unscrew the
crown by turning it counterclockwise, and then
pull it out to the first click.
2. Turn the crown clockwise until the previous day’s
date appears.
3. Turn the crown counterclockwise until the previous
day of the week appears.
4. Pull out the crown to the second click, and advance
the hour and minute hands until the desired date
and day appear.
5. Push the crown back in to the normal position. If
the crown is of the screw lock type, screw it in
completely by turning it clockwise while pressing
it.
Note: Do not set the date and day between 9:00 p.m. and 3:00 a.m. Otherwise, the date
and day may not change properly. If it is necessary to set the date and day during
that time period, first change the time to any time outside it, set the date and day
and then reset the correct time.
Day of the week